Common plumbing myths

Posted on by bianca in Blog Comments Off on Common plumbing myths

Plumbing hamilton

There’s a lot of misinformation out there when it comes to plumbing. Because we can’t see most of the waterlines in our homes and businesses, we tend to take them for granted until something goes wrong. It’s important to realize, however, that what appears to be a minor inconvenience can eventually have a disastrous effect on your property. That’s why it’s important to be able to separate fact from fiction. If you experience signs that indicate that something’s wrong with your pipes or drains, contact a plumber right away. No matter where you are in Southwestern Ontario, Pitton Plumbing can provide a skilled plumber in your area, including Burlington, Hamilton and Oakville.

Myth: A little leak is no big deal

While a dripping faucet can seem like a minor problem, it sometimes indicates a bigger issue. If left unattended, a leak under your sink or around your taps can create mould and cause water damage. Worse, what appears to be just a small dribble can be a symptom of outdated or misaligned pipes, breakages or clogs. Don’t ignore it: schedule an inspection with a plumber ASAP!

Myth: Lots of things are flushable

Ads boast that disposable baby wipes and sanitary products can be flushed down the toilet, but in reality, they can damage your sewage system. These products don’t break down after flushing and will eventually plug up your plumbing. The only thing that should go down the latrine besides you-know-what is toilet paper. Anything else is nearly guaranteed to cause future problems. If you’re experiencing a recurring clog, have your plumbing checked by one of our professionals.

Myth: A slow drain is nothing to worry about

It’s a common mistake to think that as long as the water eventually goes down a drain, everything is fine. A slow or partially plugged sink should never be neglected as it can indicate many problems, like aging pipes, tree roots encroaching on the lines or a partial obstruction that can become a full-blown blockage. These things lead to major plumbing disasters that damage your property and cost you money. Our company in uses video technology to check your sewer and drain, accurately locating buildup or breaks before they cause trouble.

Myth: Plumbing doesn’t need maintenance

Just like a car needs tune-ups and inspections to run efficiently, your plumbing needs regular checkups, even when everything seems to be working. Pitton Plumbing provides a full range of residential, commercial and industrial services. Contact us today to connect with our Hamilton, Burlington and Oakville plumbers for your pipe, sewer and drain maintenance.


Causes of stinky water and drains

Posted on by bianca in Blog Comments Off on Causes of stinky water and drains

Hamilton plumber

While having stinky water and drains is usually a benign occurrence, occasionally it can indicate that there’s a potential health risk somewhere in your water system. If bad odours persist, it’s important to get your plumbing inspected by a professional. Here are some of the typical causes of that foul smell in your sink or shower.

Dry P-trap

The P-trap is a U-shaped pipe directly under your sink. Water gathers naturally at the base of the U, acting as a barrier that keeps sewer gases from coming up the drain. When the P-trap is dry, due to pressure pulling the water elsewhere in the lines or a lack of use, smelly gas from the sewer can come right up into your house. Simply pouring water down the drain can solve this issue. If the P-trap continues to dry out regularly, it may be cracked or broken, a situation that requires the expert touch of a plumber.

Food and debris in the drain

Sometimes food, soap, hair and other waste gather in the drain and grow bacteria or mould. This produces a sewage-like smell, which can then waft into your living area. Debris in your drain can also contribute to slow drainage and serious blockages. If you can’t get rid of the smell on your own, you’ll need to contact a plumber. Pitton Plumbing has trained professionals available in Hamilton, Oakville, Burlington and surrounding communities in and around the GTA.

Bacteria in your hot water heater

If you heat your water using a tank, keeping a low temperature for a long period of time can create the perfect breeding ground for bacteria. This will cause your hot water to smell. However, simply raising the temperature setting on your tank by several degrees should kill the germs. After you’ve taken this step, run your taps for a few minutes to flush everything out.

Smells from your sewer line

Many problems can occur along your sewer line. You may have a sewage back up if multiple drains in your home are plugged, or your toilets aren’t flushing properly. This situation should definitely be handled by a professional. A skilled plumber in can make sure that your sewer and drain are in good working order.

Schedule a visit from a plumber

If poor drainage and smelly water are a persistent problem, contact Pitton Plumbing for quick, friendly assistance. Serving all of Southwestern Ontario, we can quickly connect you with a plumber in Burlington, Hamilton, Oakville and surrounding areas. Our plumbers can handle residential, commercial and industrial sewer and drain jobs of all sizes.


Add Grease Interceptor Maintenance to Your Plumbing Checklist

Posted on by bianca in Blog Comments Off on Add Grease Interceptor Maintenance to Your Plumbing Checklist

Keep the Stink Out of the Sink at Your Business in Oakville and Hamilton!

It is not easy to operate a restaurant, business or any service facility equipped with a large commercial kitchen. Whether it is a school, hospital or business establishment, ensuring safety and efficiency is paramount to the success of your operation. In addition to the task of cooking and/or serving huge volumes of food, the daily cleaning up can be tough, even if you have the right tools. Keeping your kitchen plumbing in order is not just a matter of convenience; it is about maintaining hygiene and avoiding costly drainage problems that can stall business productivity and damage your image.

Grease interceptors or grease traps are invaluable as they trap grease in wastewater from dishwashers and sinks, preventing it from clogging sewers. But when the sludge won’t budge, you have a plumbing issue on hand. It is important to invest in regular cleaning and maintenance of grease interceptors by trained technicians before they clog your sink and disrupt business. Here’s more on the subject.

Grease interceptor

What is a Grease Interceptor?

Conventional grease traps, or passive grease traps as they are also called, are metal or plastic tanks in food service facilities that prevent kitchen fats, oils and grease (FOG) from flowing into the sewer and septic tank. These solid waste products are lighter than water, hence, they float and settle in sewers after the water seeps through. Grease interceptors are large outdoor tanks that hold the FOG and let the wastewater flow into the sewer. The key reasons to schedule regular maintenance include:

  • Timely Pump Out: Grease traps are not geared to stop every bit of the sludge from reaching the drain. For them to work effectively, the increasing volume of FOG needs to be emptied out when it occupies about 25% of the tank.
  • Meeting Local Regulation: Environmental regulations by your city will mandate that you measure and clean FOG content levels in grease traps in order to keep the building’s plumbing working optimally. It is imperative that traps are regularly maintained to keep drains FOG-free.
  • Regular Maintenance: Since grease interceptors are not designed to hold large amounts of FOG, it is necessary to clean them weekly or monthly, depending on your trap size and activity at your place of business.
  • Prevent Costly Repairs: Routine maintenance keeps costly drainage problems at bay and allows both your sewers and your business to flow smoothly.

5 Simple Ways to Clean Grease Traps

There are a few things you should do to keep your grease traps functioning well. There are a few things you must avoid at all costs too. Check these tips:

  1. Make sure that your grease trap is the right size for the sink at your business facility.
  2. See that it is properly installed by trained and licensed plumbers.
  3. Remove food waste from pots, plates and pans before washing up.
  4. Avoid pouring in hot water, chemicals, bleach and drain cleaners into the trap to dislodge the sludge. These practices emulsify the solids allowing them to flow through the traps and then solidifying in your sewer instead. This can lead to further damage and expensive repairs.
  5. Schedule timely grease trap maintenance to prevent costly repairs later.

Hire Licensed Plumbing Professionals in Oakville and Hamilton

Pitton Plumbing is dedicated to serving establishments and business institutions since 1983 to provide outstanding service in all areas of plumbing. From routine grease interceptor maintenance and repairs to waste hauling, sewer, sanitation and plumbing services, our professional plumbers in the Hamilton and Oakville regions are only a phone call away. We come prepared with the latest equipment and fully-stocked service vehicles to provide quick, lasting, hassle-free solutions at competitive prices.

Schedule an appointment by calling us at 1-800-499-4184. Also, feel free to contact us online.


Trusted Plumber for Your Business Premises in Oakville, Hamilton, and Surrounding Areas

Posted on by bianca in Blog Comments Off on Trusted Plumber for Your Business Premises in Oakville, Hamilton, and Surrounding Areas

With an eye on cost control, it can be tempting to call a general handyman or try to DIY a plumbing problem at your commercial establishment. When you are running a business, trying to fix all problems by yourself is not only inconvenient, it will also come in the way of your productivity and profitability. Any plumbing problem could potentially be a costly business interruption if not resolved quickly and accurately.

Plumber Oakville & Hamilton

When to Call Professional Plumbing Services

There are a number of plumbing issues which may require the attention of a trained and licensed plumbing service:

  • Emergencies such as sudden leaks, clogged toilets, broken grease traps, or sewer line blockages.
  • Installations, repairs, maintenance of equipment such as commercial water heaters, and routine cleaning of sewers, drains, and grease interceptors.

Benefits of hiring a commercial plumbing service:

  • Professional expertise: When you hire a commercial plumbing service, you have skilled professionals with access to the best equipment and a deeper understanding of the intricacies of commercial building related plumbing.
  • Comprehensive services under one roof: Established commercial plumbing services not only take care of your routine repairs and emergencies, they also offer a number of maintenance packages to prevent potential issues. Additionally, their customer service teams ensure seamless support, making your interactions quick and hassle-free. 
  • Trained, licensed and certified: Professional plumbers are trained to use the latest equipment and plumbing tools to get the job done in a safe and efficient manner. They also meet licensing and certification requirements that are required by commercial building regulation.
  • Preventative maintenance and cost saving: While you or your building maintenance crew may try to fix minor issues, often the fix is temporary and can eventually become a bigger, costlier problem. Professional plumbers can offer a bundle of services and lasting solutions to avoid future problems and save on frequent repair costs. 
  • You may think that hiring a commercial plumber is expensive. However, if you want a quick, dependable, and expert resolution to your plumbing issues, professional plumbing services is the way to go.

Leading Commercial Plumbing Services in Oakville and Hamilton

Regardless of the plumbing problem at your office building, make your first call to Pitton Plumbing. We have years and depth of experience across a number of plumbing services in various establishments. Our clients include high-rise buildings and condominiums, factories and manufacturing plants, retail plazas and malls, restaurants, dealerships, day care centres, retirement homes, and schools. We can help you with grease interceptor maintenance services, sewer and drain services, and commercial plumbing services such as:

  • installation and repairs of faucets, sinks, toilets, showers, bathtubs, pumps, dishwashers, hose bibs, grease interceptors, and garburators
  • hot water heater repairs and maintenance
  • backflow preventer installation and maintenance
  • remodelling for commercial kitchens and bathrooms
  • any other plumbing emergencies and repairs

 
Leave commercial plumbing in the Oakville and Hamilton region to trusted plumbers from Pitton Plumbing. Our crew comes prepared with a fully-stocked service vehicle and has the training and experience to tackle any plumbing problem imaginable.

Schedule an appointment by calling us at 1-800-499-4184. Also, feel free to contact us online.


Found A Leak? Should You Fix it or Call A Plumber?

Posted on by bianca in Blog Comments Off on Found A Leak? Should You Fix it or Call A Plumber?

If you have ever spent a sleepless night with the sound of a continuously dripping faucet or running toilet, you probably woke up feeling frustrated and tired. Perhaps your DIY enthusiasm tempts you to fix the leak right away. Going on a vacation and discovered the water heater is leaking? Considering a quick fix on your own? While a plumbing leak is inconvenient and expensive, don’t give in to temptation and attempt a hurried DIY fix. If a leaking pipe, faucet, dishwasher, washing machine, toilet or any other faulty plumbing in your home is not identified and repaired correctly, you may face mold growth and other long-term structural damage. Your best bet is to call a trained and licensed plumber to get the job done quickly and efficiently.

plumber hamilton ontario

Here are a few tips to identify small leaks before they become large, expensive plumbing issues. When you find the source of a leak, don’t hesitate to call your trusted local plumbing service in the Oakville and Hamilton area.

How to Identify Common Leaks Through Routine DIY Inspections:

  • Faucet and toilet leaks: Check if there are any puddles around the drains, or at the base of your faucets. Keep an eye on any drips or squeaky sounds when you turn your faucets on and off. Look for any groaning or bubbling sounds from the pipes under or behind the toilet. Note any unusual smells around the sink drains or near your toilet.
  • Appliance leaks: Inspect your appliances such as water heater, washing machine, dishwasher for any unusual sounds, excessive moisture, bulging or cracked hoses, or loose hose connections. Check for any unusual smells, water accumulation under the appliance, or restricted water supply.
  • Other plumbing leaks: Choose a day that is not too humid and take a close look at all the plumbing in your home. Examine all exposed pipes for any signs of moisture. Check for any corrosion in brass or copper fittings. Turn on all the water faucets in your sinks, showers, and tubs to monitor water pressure and ensure a steady flow. Observe whether the water drains out quickly or takes a long time to ebb. Examine your floors and ceiling to check for damp areas, water droplets or water stains. Water damaged insulation, floorboards, carpets and drywall can harbour moisture and become breeding ground for mold spores. If your home smells musty, you may have a hidden leak and mold

When to Call A Professional Plumber

If you are handy around the house, you will usually have a few essential tools, and be able to fix minor leaks on your own, by replacing the O-rings, washers, or other small parts. However, you should enlist professional plumbing services if:

  • You do not want to attempt DIY plumbing projects or tackle the leaks on your own
  • The leak persists after trying minor fixes on your own
  • You want to prevent costly repairs by investing in thorough inspections and regular maintenance our home’s pipes, drains, and appliances

 
Professional plumbers come with fully-stocked service vehicles and have access to the best diagnostic equipment. They can check your home’s plumbing, give you in-depth assessments, and carry out routine cleaning and maintenance, as well as fix any problems that are causing your water bills to soar. Prevent mold growth, save water, and enjoy a stress-free home with timely and regular plumbing inspections and repairs.

If you live in Oakville, Hamilton or anywhere in Southwestern Ontario, look no further than Pitton Plumbing to manage all your plumbing related issues. Fill out our online form to book the services of a professional plumber. You can also call us at 1-800-499-4184.


Innovative Tips from Your Plumber in Oakville on How to Save on Heat

Posted on by bianca in Blog Comments Off on Innovative Tips from Your Plumber in Oakville on How to Save on Heat

Every winter, you find yourself cringing at the sight of your heating bill. The rest of the year it stays tolerable, but once the cooler temperatures roll around, it can double or triple in cost which is never easy on the home budget.

While heating costs go up in the winter and you cannot avoid the increase, you can prevent how much the cost increases. In most cases, there are opportunities throughout your house for reducing your consumption, and lowering your winter heating bills.

Plumber in Oakville Ontario

Tips from Your Oakville Plumbers for Cheaper Heating this Winter

You cannot avoid turning on the heater, but you might be able to avoid how often you rely on your heater to keep your house comfortable.

To lower your heating costs this winter, try a few of these insider tips:

  • Take Advantage of the Sun: The sun is your best source for all-natural (and free) heat. During the day, open the shades so that sunlight can come inside and heat your home, then turn down your thermostat.
  • Keep Your Thermostat Down: During the day when you are not home, turn down your thermostat. There is no reason to have your house warm and toasty when you are not there. If you have a programmable thermostat, you can set the timer to kick on the furnace and start heating your home back up a few minutes before you get home. At night, turn down your thermostat a few degrees and use warm pyjamas and heavier blankets.
  • Maintain Your Heating System: A dirty and unmaintained furnace consumes more energy than a well-maintained one. In fact, if you were to change your furnace filter every two months, you can increase efficiency by 50 percent. Also, having your furnace professionally inspected and cleaned just before winter ensures it is ready for the demands of the season.
  • Lower Water Heater Temperatures: Another reason your gas bill increases is due to your water heater. While you might take the measures above, have you reduced the temperature on your water heater to avoid unnecessary heat consumption? Going to the warm setting (49 degrees Celsius) also prevents scalding when you turn on the hot water.
  • Update Your Faucet: Older faucets do not have the same water saving capabilities, and the hotter water you use, the more your water heater works to replace it; thus, increasing your heating costs. Consider upgrading your faucets to the latest water-saving models.
  • Replace Your Water Heater: Depending on how old your water heater is, replacing it could lower your heating bills. A water heater older than ten years drains your electric and gas bills. If replacing, consider an on-demand gas water heater, which only uses gas when it is needed; so, you do not have unnecessary heat consumption.


If you would like to save on your heating costs this year, speak with your Oakville plumbers at Pitton Plumbing, and let us see how we can help.

We can help you with updating your faucets, replacing, and servicing your water heater, and offer money-saving tips so that you spend less on your hot water and heating this year.

Get on the right track for saving money this winter by having your plumber in Oakville from Pitton Plumbing come and service your home. Schedule your appointment by calling us at 1-800-499-4184. Also, feel free to contact us online.


What Should I Do in a Plumbing Emergency?

Posted on by bianca in Blog Comments Off on What Should I Do in a Plumbing Emergency?

There are certainly a few services offering an emergency plumber in Oakville, Hamilton, and other surrounding cities, but what can you do while you wait for your plumber to arrive?

To limit the damage to your home, and possibly mitigate the costs, there are some essential steps you can take while you wait. Troubleshooting and acting accordingly makes the process of repairing your home’s plumbing easier, and saves you plenty of hassles too.

Plumber in Oakville

Essential To Do’s While Waiting for Your Plumber

You have called for plumbing services, and the crew is on the way. At the moment, however, it is your turn to take the necessary actions to stop the damage from getting worse.

Here is what you should do while you wait:

  • Locate and Shut Off the Water Main: You should know where the water main is to your home. Whether you have a leaking pipe or a pipe that burst, now is the time to turn off that main water supply and stop the water from seeping throughout your home. Most modern houses have a water shut off near the water meter, which is on the exterior of your property. These are typically marked with “water meter” or “main water supply.”
  • Turn Off Electrical Sources: Any time you have a leak, you must assess what electrical devices, appliances, and switches could be affected, and act accordingly. That means turning off the electricity where you have leaking pipes, flooding, and clogs. If there is no potential hazard, then you can skip this step.
  • Turn Off Your Hot Water: If the issue has to do with your water heater, turn it off so that it does not continue to draw water and drain into your basement or all over the flooring. This will also reduce chances for electrocution.
  • Clean Up What You Can: Do your best to clean up the water while you wait for your plumber. Your plumber will come with equipment to take care of excess water, but the more you start removing, the less damage you will have to your carpeting, floorboards, and walls. If the issue is a sewage leak, however, do not attempt to clean this up yourself. Instead, you will need a professional that can properly and safely remove sewage water, and sanitize the area.
  • Turn Off the Affected Water Line: When you have just one faucet or area of the house causing an issue, you can turn that water source off. Most will have their water shutoff lines, including dishwashers, refrigerator water lines, kitchen sinks, and bathroom sinks. Locate these valves and turn them off so that they do not continue to spread water and the associated damage.

You may need a wrench to turn off some of your valves, especially the main water supply to your home.

When a water-related disaster strikes your Oakville or Hamilton home, you need an experienced plumber ready to respond. The team from Pitton Plumbing can help with your plumbing emergency, clogs, and even take care of your fall plumbing to-dos.

Have your plumbing emergency taken care of by the team at Pitton Plumbing. We handle everything from broken pipes to floods, sewage backup, and more.

Call us now at 1-800-499-4184. If it is not an emergency, you can also contact us online with your questions and concerns.


Fall Plumbing Maintenance Tips Every Homeowner Should Know

Posted on by bianca in Blog Comments Off on Fall Plumbing Maintenance Tips Every Homeowner Should Know

Every fall, you prepare your lawn for winter, get the cars ready for snow and ice on the roads, and tackle those fall to-dos. One item that is very likely to be missing from your fall checklist is that of your home’s plumbing.

Just like the exterior of your home, the plumbing inside and hiding in the walls needs winterizing. By taking the time to maintain your home’s plumbing and prepare it for the cold in and out, you can prevent those costly winter plumbing issues from happening.

An exterior faucet in Oakville

Essential Fall Plumbing Tips Provided by Oakville Plumbers

Now is the time to break out that to-do list you have been holding onto and add a few more items for your home’s plumbing. If you do not have the time, you can always use professional plumbing services to tackle these tasks and have one less item on your plate.

Here is what you need to do to prepare your plumbing:

  • Drain and Winterize Exterior Water Fixtures: Water fixtures outside will not handle freezing temperatures and snow. Now is the time to drain all garden hoses and put them away in a shed or garage. Spigots should be emptied and left on if the water has been turned off.
  • Be Drain Wise: Your home’s drains tend to take a beating in the fall and winter, especially with more family meals at home and of course, the holidays. Regardless, be cautious about what you put down the drain. Remember that your kitchen sink is not meant for leftovers; instead, you should dispose of food and grease in the trash before washing dishes.
  • Prevent Freezing: Frozen pipes increase the chances of a pipe burst, which is by far the most expensive plumbing It could flood your home, cause hundreds to thousands in water damage, and leave your home in disarray. To avoid this, make sure all pipes that are not exposed to your home’s heat are insulated properly. When you are not home, do not turn the temperatures down too low, even if your intent is to save on heating costs. When the temperatures drop too low, you put your home’s pipes at risk for freezing and bursting under pressure.
  • Do Not Ignore the Gutters: Consider your home’s gutters and downspouts as your exterior plumbing. They take water and draw it away from your house, thus ensuring that you do not have mould, foundation issues, or water leaks. Fall is the time to clean them and remove any leaves, dirt, or debris for better flow.

 
Getting your home ready for winter can be challenging, especially with school, work, and holiday preparations. To make the process easier, have your plumbing concerns addressed by an experienced Oakville plumber from Pitton Plumbing & Heating, Inc.

Take care of those plumbing repairs and your fall plumbing to-dos before winter is here. Contact Pitton Plumbing to schedule our professional plumbing services by calling 1-800-499-4184. Also, feel free to contact us online.


Incorrect Dishwasher Installation: What Does This Mean for Your Home?

Posted on by bianca in Blog Comments Off on Incorrect Dishwasher Installation: What Does This Mean for Your Home?

Instead of spending your precious time manually washing your dishes, why not take advantage of a dishwasher to do the work for you? While it may appear like a simple appliance to install, doing it incorrectly can result in flooding or pooling, that may lead to bacterial or mould growth. These scenarios can amount to costly repairs, all of which can be avoided if you call a professional plumber in Hamilton to help you get the job done right the first time.

A woman putting dishes in her properly installed dishwasher in Hamilton

Signs Your Dishwasher is Installed Incorrectly – Advice from Your Hamilton Plumber

 It is imperative to keep your dishes clean on a daily basis. A properly functioning dishwasher can play a key role in helping you keep your kitchen area clean, without sacrificing your time and energy. How do you know if you are getting the most out of your dishwasher? Here are a few ways you can determine if your dishwasher has been installed incorrectly:

  1. Dirty Dishes: If you find that your dishes are dirty after a wash cycle, this could signal an installation problem. After all, the purpose of your dishwasher is to ensure your dishes are clean. If the dishwasher drain hose has been installed incorrectly, dirty water that is meant to drain into your kitchen sink drain hose, will get suctioned back into your dishwasher, resulting in dirty dishes.
  2. Foul Odour: Do you notice a strange smell coming from your dishwasher or kitchen sink? If your dishwasher is installed correctly, this should not be a normal occurrence. With your dishwasher empty, run a wash cycle to make sure the smell is not simply caused by a dirty dishwasher. If the odour still persists, this may indicate an issue with your dishwasher drain hose. At this point, you will need to inspect your drain hose for any leftover debris. Your drain hose may require readjusting to fix this problem.
  3. Water Pooling: Improper drainage is another indication that your dishwasher has been installed incorrectly. Improper drain tubing or supply line installation may lead to a sink drain backup. Worse still, your dishwasher may not be able to drain water, resulting in pooling that can lead to serious flooding and water damage. Pay attention to your dishwasher drain pump and motor for signs of poor installation.
  4. Leaks: Similar to water pooling, a leaking dishwasher could spell a major disaster for the rest of your home. Leaks can be the result of an improper pump seal or drain installation. Also, inspect your dishwasher door gasket. You can identify an improper seal if it appears loose or brittle.

Kitchen appliances can be costly. In order to protect your investments and maximize their efficiency, it is important that you install these units correctly. At Pitton Plumbing & Heating Inc., we will handle all your plumbing fixtures with care and diligently work to provide only the best service for your dishwasher installation and repair needs.

There is nothing we can’t tackle when it comes to your sewer and drain in Hamilton. Contact Pitton Plumbing if you have questions or concerns about dishwasher installation or any of our other services we provide. You can reach us at 1-800-499-4184. Also, feel free to contact us online.


How often do I need to have my Septic Tank pumped?

Posted on by bianca in Blog Comments Off on How often do I need to have my Septic Tank pumped?

Like many things in your home, regular maintenance is the key to keeping your plumbing in good working order all year round. That’s why regular, scheduled sump pump pit and septic tank pumping is the best way to keep your Hamilton home’s sewer and drain system operating at peak performance year after year. But how often do you need to have your septic system pumped by a plumber? Find out below.

A Septic Tank cleaning truck in Hamilton

Determining the frequency

There are a lot of different considerations that go into to calculating the frequency of the septic tank pumping that your home requires. You’ll need to think about:

  • System capacity—Generally speaking, a 2000-litre septic tank will need to be pumped out more frequently than a tank with a 5000-litre capacity. Especially if both tanks are being used by the same number of people in the home or there is equal usage in other regards.
  • Level of usage—The level of usage that the septic system gets largely depends on how many occupants there are in the home. You may also want to have your septic tank or sump pump pit serviced by an experienced Hamilton plumber if you are expecting, or have just had, a large number of visitors that have increased your normal usage.
  • Date of the last pumping—Generally speaking, you should have your septic tank pumped every three to five years, depending on the amount of occupants and level of usage. If you can’t remember the last time you had your system pumped, it’s a good idea to err on the side of caution and have it pumped before you experience a back-up.
  • Garbage disposal—Homes that use a garbage disposal will need to have their septic tank pumped more frequently, usually once a year, due to the rapid accumulation of sludge that the septic tank will acquire.

 

Maintaining your sump pump

In many cases, residential septic issues aren’t due to a problem with the septic tank itself, but lie somewhere else in the sewer and drain system. Sewage holding tanks, sewage ejection pits, and sump pump pits all need to be pumped out from time to time to ensure that they continue to work properly.

Pitton Plumbing is Hamilton’s source for residential septic services, plumbing and portable sanitation. When you need a plumber, you can count on our fast, friendly and professional service. Contact us today to learn more about our residential, commercial and industrial sanitation services or to request a free quote.

 

 


Types of Plumbing Pipes: A General Guide

Posted on by bianca in Blog Comments Off on Types of Plumbing Pipes: A General Guide

You might not give much thought to the different kinds of plumbing pipes in your home. However, these pipes are integral to your plumbing system. By familiarizing yourself a bit with the various piping options available, you can explore which ones are being used at your residence. Having this knowledge could help streamline the repair process when you need to call a plumber in Oakville.

A stack of copper pipes for plumbing purposes in Oakville

Exploring Different Plumbing Pipe Types and their Uses  

 These are some of the various kinds of plumbing pipes that might be found in your home, as well as near your residence outdoors.

  1. Copper: Copper pipes are very commonly used for residential purposes. They are highly resistant to rust, which makes them a perfect choice for supplying water to the home. Copper can also withstand high temperatures. These pipes are not usually employed for drainage.
  2. Steel: Your home might contain pipes made from galvanized steel or stainless steel. Galvanized pipes are used to move water in and out of a home. They come with a coating that is rust-resistant, and they are quite heavy. Stainless pipes are costly, and thus, they are not commonly found in the home. They can withstand salt water, so they might make a good choice in a marine environment.
  3. Concrete: Concrete is very durable, and it may also come reinforced. Reinforced concrete pipes are useful for supplying water. Smaller concrete pipes that have not been reinforced are often used to drain rain water.
  4. Asbestos Cement (AC): AC pipes are heavy, and they are more affordable than some of the other varieties. They are typically used for drainage, although they might also be utilized for ventilation purposes.
  5. Cast Iron: This kind of pipe was relied on more in the past than it is today. Cast iron pipes are very durable, but they are also very heavy. While they can be found in water distribution systems, they are generally used for drainage and sewer systems.
  6. Plastic: Plumbing pipes can be made from different types of plastic. PEX resists heat quite well, so it could be a solid option for a water-based home heating system. PVC only has the capacity to withstand cold water, and it can be found in high-pressure water drainage systems. CPVC is a variation of PVC, and it can endure hot and cold temperatures. CPVC might be used in a water supply system.
  7. Clay: Clay pipes are heavy, and they cannot be cut very easily. Clay can resist chemical erosion, which makes it a viable option for an underground setting.

The plumbing in your home is an important system. Using the right pipe types for the right jobs could prevent the need for frequent plumbing repairs. The pros at Pitton Plumbing & Heating Inc. are always happy to discuss piping possibilities, as well as help you troubleshoot plumbing issues in your Oakville home.

Pitton Plumbing has extensive experience and a solid track record of providing superior plumbing services in Oakville. Contact us if you have questions or concerns about the pipes in your home plumbing system. You can reach us at 1-800-499-4184. Also, feel free to contact us online.

 


Plumbing Considerations When Buying a New Home in Oakville

Posted on by bianca in Blog Comments Off on Plumbing Considerations When Buying a New Home in Oakville

You have thoroughly inspected every inch of the home you are considering, but what about the plumbing in a new home? If you do not know what the plumbing looks like, you could be missing a costly issue lurking beneath your foundation or inside the walls.

Regardless of the age of the home, it is in your best interest to always inspect the plumbing or hire a plumber in Oakville to conduct a plumbing inspection and ensure your peace of mind.

A happy couple with a new home in Oakville

Critical Areas to Inspect with Plumbing in a New Home

Once you have your eyes set on a specific house, you must conduct your due diligence. Due diligence involves more than assessing the value or doing a safety check; it also means inspecting the insides of the home, such as like electrical work and plumbing.

When reviewing the plumbing in your Oakville home, here are a few critical features to check:

  1. Inspecting the Main Sewer Line: Sewer line issues are costly. Whether it is an inevitable clog, deteriorating line, or tree roots growing through, having the sewer line thoroughly inspected is critical. If the line were to collapse, it could lead to extensive damage to your lawn and even the inside of your new home. While you can still buy the house with a sewer line issue, you might be able to negotiate that the seller fixes the line or deduct the cost of a replacement from the home’s selling price.
  2. Water Heater Condition: Water heaters rarely tell you when they are about to go, but once they do, they tend to leave a flood. The average water heater lasts approximately 10-15 years, and depending on the size of your new home, the cost of replacing that water heater could add up quickly. Not only do you want to inspect the age and condition, but also where in the home it is located. Some home builders place water heaters in difficult areas to reach or spots where they are likely to cause significant damage if a leak occurs.
  3. Toilets and Potential Leaks: A toilet is likely the last thing you would inspect, but it is a critical component to your new home’s plumbing. Quite often, homeowners ignore small leaks appearing from the bottom of their toilet. What they do not realize, however, is that those small leaks are leaking into the subfloor and causing severe damage.

Purchasing a new home is a big investment, and one you should only close after inspecting thoroughly. There is no harm in hiring Oakville plumbers to come out and do a plumbing inspection. Not only does it provide you with peace of mind, but it can also give you some negotiating power if you need to replace or repair critical plumbing components as part of the purchase.

Contact Pitton Plumbing today for an inspection of the existing plumbing in your new home or if you have any repair concerns. Call us at 1-800-499-4184 or contact us online to inquire about our plumbing services in Oakville.


Spring Has Sprung: Refresh Your Plumbing with These Tips

Posted on by bianca in Blog Comments Off on Spring Has Sprung: Refresh Your Plumbing with These Tips

The weather is getting warmer, trees are budding and birds are singing. If you think the winter weather is hard on your skin and hair, consider what it does to your home! Your plumbing in particular, takes a beating with below freezing temperatures coming up against indoor heating. After a chilly winter in Hamilton, spring is the perfect time to clean your home and get a little maintenance work done on your plumbing. Pitton Plumbing offers friendly, reliable and experienced plumbers in Oakville, Hamilton and Burlington to keep your home’s plumbing in top shape for the entire year.

Plumbing tips for spring in Hamilton Ontario

Spring Cleaning Tips for Your Plumbing

Incorporate the following tips into your spring plumbing maintenance cleaning routine and enjoy having your entire home clean and functioning for the warm weather:

  • Kitchen – Check for drips at your kitchen faucets and repair them to save water. Ensure your sinks all have strainers to keep debris from entering and clogging the pipes.
  • Bathrooms – Test your toilet for leaks by adding 6 drops of food colouring to the tank. If it is leaking, you will see the colour in the bowl within half an hour. Check how your toilets are flushing as well. If they take some extra finessing or need to be held down longer, it may be time to replace parts and save money on your water bill. Cleaning mineral deposits from your shower head will also give you a fresher shower with better water pressure.
  • Appliances – Ensure your water heater temperature is not set higher than 120 degrees. Check the date it was made by reading the first four serial numbers, which represent the month and year of manufacturing. If it has been longer than 15 years, it is time to get a new one. Pitton Plumbing has plenty of experience replacing hot water heaters for Hamilton and surrounding area residents.
  • Other – Test your sump pump by pouring water into the sump pit. This should turn on the pump and be emptied before turning off. Take a moment to inspect exposed pipes inside your basement and in vulnerable areas like the garage, attic and outside your home. If winter got the best of them, contact a plumber in Hamilton or your residing city to repair it.

If you live in Hamilton, Burlington or Oakville and want a thorough maintenance check or specific repairs on your home’s plumbing system, call the experts at Pitton Plumbing. Our years of experience, friendly staff and dedication to providing fast and comprehensive plumbing services to Hamilton, Burlington, Oakville and surrounding areas make us the perfect choice for spring cleaning your home’s plumbing. We can handle everything from toilet installation to leaky pipe repairs. Request a quote by contacting us online or give us a call to book an appointment today at 1-800-499-4184.


Is It Time to Call a Plumber in Burlington for Your Sump Pump Replacement?

Posted on by bianca in Blog Comments Off on Is It Time to Call a Plumber in Burlington for Your Sump Pump Replacement?

An old Sump Pump ready to be replaced in Burlington.
If any water gets into the basement, a sump pump is in place to prevent backups and flooding. The pump pulls the water away from your foundation, and it is a critical component of your building for maintaining structural integrity.

While handy, sump pumps do not last forever. Eventually, you will start to see multiple sump pump issues telling you it is time to replace your unit. Typically, you can expect to replace yours about every ten years; even with regular maintenance.

When to Call a Plumber for Your Sump Pump Issues

Your sump pump gives off certain warning signs that it is time for new plumbing in your Burlington home or commercial building. Taking action quickly to repair or replace your unit will help you avoid serious plumbing issues in the future.

What are the signs it is time for a new sump pump? Here are some of the main ones to look out for:

  • Excessive Vibrations from the Unit: The sump pump relies heavily on its impeller, which draws water in and out of the basement. Debris often gets into the impeller along with water, which damages it. Eventually, the damage leads to vibrations. While you could repair the impeller, it may be more cost-effective to replace the pump.
  • Frequent Power Outages: Your sump pump is wired into your home’s electrical system. During power surges, your sump pump is at risk for damage. If you have frequent power outages, your sump pump should be inspected. Consider installing a whole home power surge protector afterward so that you can avoid damaging items in the future.
  • Rust: Rust is a definite sign that it is time to replace your pump. Any signs of rust on the battery terminals and other components will disrupt water flow and make your pump ineffective.
  • Loud Noises: Any odd or unusually loud noises should be inspected because broken or damaged components often cause these problems.
  • Motor Problems: Once the motor of your sump pump starts to fail, you will need to replace the entire unit. You can avoid this by having a plumber install a filter, which prevents sediment from being sucked into the motor. Also, the filter will need cleaning periodically.
  • Running Too Long: Either you have too much water for the model of a sump pump in your basement, or the pump has faulty wiring. Regardless, if your sump pump runs for long periods, consider an upgrade after your current one has been used extensively.

 
If your home or commercial sump pump is giving off the warning signs for replacement, Pitton Plumbing can help. We offer residential and commercial plumbing in Burlington, including sump pump repair and replacement.

Contact Pitton Plumbing today for all your sump pump concerns. Call us at 1-800-499-4184 or contact us online to inquire more about our plumbing services.


What You Can and Cannot Dump Down Your Sink – Advice from Your Oakville Plumbers

Posted on by bianca in Blog Comments Off on What You Can and Cannot Dump Down Your Sink – Advice from Your Oakville Plumbers

Potato skin being dumped down a sink in Oakville
Your home’s kitchen disposal system is a convenience but it can also very easily become a nuisance. It is installed for the purpose of grinding up food leftovers and helping liquid, soluble waste go down the drain. What many of us do not realize is that it does something else too: it tempts you to put as much as you can into the sink rather than scraping it into the trash.

Even the most high-end disposal system should not be used as a literal “garbage” disposal. When you dump anything and everything into your sink, you are inviting serious plumbing issues. Not to mention, all the grease, fat and solid food debris you send to your local sewer line will affect the ecosystem.

5 Items Your Plumber in Oakville Warns About Putting Down the Drain

Some of these may seem like common sense, while others might surprise you. By taking care of the plumbing in your Oakville home, and treating it knowledgeably, you will have fewer plumbing issues plaguing your household (and wallet) in the future.

A few items to discard in the trash versus your kitchen sink include:

  • Coffee Grounds: Coffee grounds cause blockages and do not belong in the sink. Instead, dump them into your trash or better yet, find a way to reuse them; such as adding them to your garden’s compost pile.
  • Eggshells: Eggshells, despite the myths, do not help sharpen the blades of your garbage disposal. What they do instead is leave granular waste that helps form clogs inside your sewer lines.
  • Grease, Fats, and Oils: They may be in a liquid state, but grease, oils, and fats are what generate fatty blockages in sewer lines. They are also the primary cause for sewer overflows and plumbing repairs.
  • Meats: Raw meat, meat with gristle, and cooked meats belong in the trash. When ground by your disposal, meat becomes stringy and wraps up in the blades. Worse, the grease that pours off those meat particles helps create blockages.
  • Starchy Products: Starches include bread, potatoes (and potato skins), flour, pasta, and rice. Whether cooked or uncooked, the starch in these products allows them to become slimy once they encounter water. As they swell, they form blockages with other food and particles going down the drain.

 
Regardless of how much water you run after putting these products in the sink, and no matter how long you run the disposal unit, these items will cause a clog.

How to Solve Plumbing Issues After Flushed Items Down the Kitchen Sink

Wondering when to call a plumber for issues caused by items you have sent down the drain? If you do not have a clog right now, you could be okay. However, remember henceforth that if it is food of any sort, put it in the trash. Scraping plates into the garbage takes only a few seconds, and it could save you several hundred dollars that a sewer line repair could cost.

If your drain is already clogged or you are noticing slow drainage, contact Pitton Plumbing & Heating Services in Oakville today. Our team can perform a drain and sewer line inspection and remove the clogs before they become a serious issue.

Contact Pitton Plumbing today for clogs or other drainage concerns. Call us at 1-800-499-4184 or contact us online to inquire about our residential and commercial services.


Sewage Pump & Sump Pump Installation & Repair

Posted on by bianca in Residential, Sewer & Drain Services Comments Off on Sewage Pump & Sump Pump Installation & Repair

Residential Sewage & Sump Pump Installation in Hamilton

In some instances, customers rely on sump pumps and sewage pumps to avoid flooding in their basements. These pumps are used to pump water and sewage waste away from your home. Whether you need installation of a sewage pump or a sump pump in Hamilton, Pitton Plumbing has the team for the job.

Sump Pumps

Sump pumps are installed in the lowest part of your basement or crawlspace, usually in a specially constructed sump pit. Water flows into the pit either through drains or from natural water movement through the soil. Once water is collected in the pit, the sump pump then pumps the water out and away from the building so that the basement stays dry.

Sewage Pumps

Sewage ejector pumps are installed when a plumbing fixture is placed below a main sewer or septic line. The waste and water from these lines have to reach the main lines so they can be disposed of, but can only do so through the help of a pump. Sewage ejector pumps are used to pump residential sewage to the elevated city sewer line or into a septic tank.

Pitton Plumbing will ensure that both sump and sewage pumps are installed correctly and will work to your advantage in the most convenient way possible. We are able to install, replace and repair these pumps in Hamilton and surrounding areas. We even offer services to clean the sump pump pit that the pump is installed within.

Need a Sump Pump in Hamilton or Southwestern Ontario?

Our experienced plumbers will be able to assess each situation and determine the type of pump required for your needs. They will also be more than happy to clarify any concerns or questions that you may have. We provide services in Hamilton and all of southern Ontario, including Burlington and Oakville. Give us a call to learn more about our sewer and sump pump installation.


Commercial Sewage & Sump Pump Services

Posted on by bianca in Commercial & Industrial, Sewer & Drain Services Comments Off on Commercial Sewage & Sump Pump Services

Call Pitton Plumbing for Commercial Sewage & Sump Pump Services

Commercial sewage and sump pumps are used to help prevent flooding of basements and crawl spaces. They work to pump waste and water away from buildings to prevent it from leaking inside and flooding your business. It is important that these pumps are installed in commercial buildings.

Many businesses use their basements to store excess products and supplies. With the common occurrence of basement flooding, especially in areas with wet climates, you could be putting hundreds or thousands of dollars at risk if you do not have the proper equipment in place to keep your basement free of water. Your solution to this is the installation of a sump pump.

Protect Your Business with Sewage & Sump Pump Installations

Sump pumps are usually installed within a special pit that collects water and then pumps it away from the building to prevent flooding. Sewage pumps serve a similar purpose and are used to pump sewer waste from low plumbing fixtures up to the main sewer line. Without this pump, the waste can back up and flood your basement storage area.

To prevent basement flooding and sewer backups at your business, be sure to contact Pitton Plumbing. Our expert plumbers can assess your unique situation and find the best solution to your problem. Give us a call today to learn more about our commercial services.


Frozen Pipes: What You Need to Know this Winter

Posted on by bianca in Blog Comments Off on Frozen Pipes: What You Need to Know this Winter

Preventing pipes from freezing, Hamilton Ontario
As we head towards another winter season, it is important to take the right steps and prepare your home for the cold temperatures. Frozen pipes are a common household problem that can be avoided with a little foresight and preparation.

What problems do frozen pipes cause?

As water freezes, it expands, placing pressure on whatever it is being contained by or carried through. In the case of pipes, both metal and plastic pipes can break from pressure. Pipes that are most exposed to the temperatures, such as outdoor swimming pool supply lines, or supply pipes in unheated interior areas such as basements and garages, are the most susceptible to freezing. Those that are located against exterior walls with little or no insulation are also vulnerable to freezing.

How can you prevent pipes from freezing?

Take some time before the temperatures drop to prepare your pipes for the season.

  • Drain water – Follow the manufacturer’s directions to drain your swimming pool and water sprinkler supply lines. Make sure you drain and store outdoor hoses, drain outdoor valves and leave them open so that any remaining water can expand without breaking the pipes.
  • Insulate vulnerable pipes – Check your home for water supply lines that are located in unheated areas. The basement, crawl space, attic, garage, and kitchen and bathroom cabinets are common areas where pipes are prone to freezing. Hot and cold water pipes should both be insulated. Consider products that are designed to insulate water pipes. “Pipe sleeves,” or UL-listed “heat tape,” may be useful for exposed water pipes. Newspaper may also be used to provide additional protection.
  • When the temperature drops, use doors – Leave garage doors closed as much as possible if there are water supply lines in the garage. Open your kitchen and bathroom cabinet doors so that pipes can be exposed to warmer air.
  • Keep the thermostat steady – Leave your thermostat temperature the same during the day and at night. When it is very cold, maintaining a steady temperature through the day and night can limit the risk of pipes freezing and bursting. If you are leaving town, do not shut the heat off.

What should you do if your pipes freeze?

If your pipes freeze, it can be tempting to try to thaw them on your own. Thawing pipes should be done with caution and it is usually best to call in an expert. It is crucial to locate the exact area of freezing and properly thaw it in order to minimize the damage.

If you face a problem with frozen pipes this winter, our plumbers in the Hamilton area can help. Our team of experienced plumbers provide fast and dependable plumbing services in Burlington, Hamilton, Oakville and surrounding areas. Schedule your appointment by calling us at 1-800-499-4184 or contact us online.


Consult an Expert Commercial Plumber in Oakville to Eliminate Bathroom Odours at The Source

Posted on by bianca in Blog Comments Off on Consult an Expert Commercial Plumber in Oakville to Eliminate Bathroom Odours at The Source

Getting rid of bathroom odour in Oakville Ontario

Have you noticed a foul smell coming from your commercial or residential bathroom? Maybe you have scrubbed the room clean from top to bottom but just can’t get the stench to go away. Unfortunately, cleaning the area will not resolve the problem if the smell is coming from your toilet or pipes. The only way to remedy the situation is to locate the source of the problem.

Here are some of most common plumbing issues that can result in a foul odour:

  • Clogged Drains: Hair, dirt, and other debris can accumulate over time and cause an obstruction in your drain, which means water will not be able to properly pass through. This can result in standing water that can produce an awful smell in your bathroom.
  • Dry Pipes in Your Bathroom: The U-shaped pipe beneath your bathroom sink is called a P-trap. Your pipes are functioning properly when a minimal amount of water is sitting in the P-trap. This water comes from turning off the water source in the bathroom and/or flushing the toilet. The water coats the pipe and prevents harmful sewage gases from contaminating your bathroom. When a P-trap is dry, the sewage gas will enter your bathroom, which is why you smell a rotten odour.
  • Cracked and Loose Pipes: If you notice a cracked or loose pipe, contact a certified plumber in Oakville right away. Dirty water and sewage gases are entering your bathroom, resulting in a foul smell.
  • A Dirty Bathroom: Be sure to regularly clean your bathroom toilet, sink, floor and tub, as germs and bacteria can grow quickly. Also, since your bathroom is a high-moisture area, keep an eye out for mould, which has a musty smell to it.
  • A Broken Seal: If your toilet isn’t filling up properly after your flush, it is possible that you may have a broken seal. Each time you flush your toilet, the gases are being released from the exposed area and causing the stench.
  • A Blocked Roof Vent: If your roof vent is obstructed, it will prevent fresh air from entering your home, forcing the sewage air to pass through your bathroom drains.

Smelling sewage gas in your home is an indication that sewer gas is escaping from your drainage system. The methane and contaminates in sewage gas can be hazardous to your health, causing headaches, dizziness, nausea and even more serious conditions. Methane gas is also highly flammable, and can cause an explosion. Speak with a professional plumbing company immediately if you detect the distinctive, foul odour in any area of your home.

Repair Your Drain and Sewage Plumbing Problems in Oakville, Hamilton, or Burlington Today

If you have a persistent, noxious smell coming from your bathroom, don’t wait to contact the team at Pitton Plumbing. Our variety of fast and effective plumbing services can ensure your bathroom drain and odour problems are resolved. Our certified plumbers will provide suitable solutions and advice to keep your plumbing system in great working order. We also have the technology and the expertise to conduct a video inspection of your sewers. This enables us to accurately determine the condition of the piping, eliminating the guess work and saving you expensive repair costs.

Call Pitton Plumbing today for drain and sewage repairs at 1-800-499-4184. Get rid of that foul smell in your bathroom once and for all. We also offer commercial plumbing services to business locations. Contact us online to schedule an appointment to have an expert plumber in Burlington visit your home.


What You Should Know About Your Home’s Plumbing Pipes

Posted on by bianca in Blog Comments Off on What You Should Know About Your Home’s Plumbing Pipes

Plumbing and pipes in the home in Hamilton Ontario

Don’t be surprised or worried if you find that your new home’s plumbing system is fitted with plastic pipes. A common misconception among homeowners is that plastic pipes may be cheap and less durable than other traditional materials like metal or steel. However, you may be surprised to know that certain types of plastic may work well in your home. Read on to learn the differences between lead, cooper and plastic pipes and why plastic may be the safer choice.

Lead Pipes

It’s highly likely that your home has lead pipes if it was built before 1930. Lead pipes can be dangerous for your health, as they can contaminate your drinking water and cause lead poisoning. Lead ingestion can cause delay in a child’s mental and physical development. If consumed by an adult, lead can cause brain and kidney problems, as well as strokes and cancer. The best thing you can do is have your water tested to determine if in fact it is contaminated with lead. If it is, consider investing in a lead filtration system or change your plumbing system all together.

Steel Pipes

Steel pipes are extremely durable; however, they do rust over time, compromising the quality of your water and also causing problems for your plumbing system. This includes blocked pipes, lower water pressure and corrosion build-up on the inside walls of the pipes. You will know if the steel has rusted if you notice brownish water flowing out of your faucets.

Copper Pipes

Copper pipes are durable and easier to work with than steel pipes, but are expensive and also pose serious health risks due to lead contamination. High levels of copper can cause fatigue, headaches, muscle and joint pain, hypertension, liver damage and other severe health problems. They are also prone to pinhole leaks if they are subjected to temperature fluctuations as the time passes.

PVC Plastic:

PVC plastic is a popular choice because it is affordable, simple to install, and will not oxidize. This white or cream-coloured plastic is commonly used for drain pipes. Other types of plastic pipes are used to move water to the kitchen and bathroom. PVC can be used in both instances but some plumbers advise against it as it can crack and leak, and some parts can deteriorate.

PEX Plastic:

PEX, or cross-linked polyethylene, has been commonly used in plumbing systems for the last 20 years. It can cost more than PVC but up to 30% less than copper. It is flexible and simple to install, but not a good option for outdoor plumbing solutions, as it loses its quality in direct sunlight. However, you will not have to worry about bursting pipes if your pipes freeze thanks to its flexibility.

It’s highly recommended that you stay away from one specific plastic called Kitec, which was very popular between 1995 and 2007. The material was known for corroding quickly and causing substantial water damage. Keep an eye out for blue and orange plastic pipes in your home. If you do notice this type of plumbing system, speak with a professional plumber in Oakville right away to inspect the condition of your system and prevent a disaster.

Book Your Home Plumbing Inspection with a Specialized Plumber in Oakville, Hamilton, or Burlington

If you are having plumbing problems in your home or worried about the quality of your drinking water due to corroded pipes, turn to the experts at Pitton Plumbing. As a family-owned and operated business with a strong work ethic, we understand the importance of providing quality and timely service. We offer comprehensive residential and commercial plumbing services and utilize the latest technology in the industry. With over 25 service vehicles, you know we can respond promptly and will ensure that your plumbing issues are resolved correctly the first time. We proudly service Hamilton and surrounding areas, including Burlington and Oakville.

Contact Pitton Plumbing today to get a plumber in Hamilton or surrounding areas such as Burlington and Oakville if you require repairs and maintenance services for your plumbing pipes. Call us at 1-800-499-4184 or contact us online to learn more about our pipe replacement services.